XDX-5F full hdyraulic drill rig adopts full hydraulic driving, travelling with crawlers itself. The drill head is driven by variable motor with function of two-speed mechanical gear shifts, stepless speed change with an advanced and simple structure. The power head feeding and lifting adopt a telescopic mast feeding mechanism, and the power head is also equipped with a lateral translation mechanism. The mast could be adjusted within the range of angle 0 to 90 degree for its drilling hole with a low center of gravity and good stability of the overall unit. The rig provides operator with a nice field of vision and wide and comfortable working condition. The rig looks pretty in overall structure and embodies the design thought of people oriented.
Main Features:
1、Triple series pump、main valve and motor are imported from international brands. 2、Travelling with crawlers. 3、The power head adopts a chucking structure, the power head rotation adopts a mechanical two-speed mechanism supplemented by hydraulic stepless speed regulation, which can achieve high-precision rotation of the main shaft. The power head feeding and lifting adopt a telescopic mast feeding mechanism, and the power head also has a lateral translation mechanism. 4、Equipped with digital display and program control module. 5、The mast adopts the lifting and landing mode of the oil cylinder, which can be folded to facilitate transportation and storage, and has the function of sliding to touch the ground. 6、The hydraulic system adopts load sensitive control, and the spindle rotation adopts double motor drive closed circuit, which has high working efficiency and large torque. 7、The mast is equipped with an upper and lower centralizing device, and the port is equipped with a hydraulic clamp. 8、Equipped with a orifice table and a second floor working platform. 9、Equipped with safety net. 10、Equipped with hydraulic stirrer.
Model | Unite | Remark | ||
Drilling depth | BQ | m | 1500 | φ55.6mm |
NQ | 1300 | Φ69.9mm | ||
HQ | 1000 | φ88.9mm | ||
PQ | 680 | Φ114.3mm | ||
Power head capacity | Rotation speed | r/min | 0~1100 | |
Max. Rotating torque | N·m | 5650 | ||
Spindle dia | mm | 121 | ||
Max lifting force | kN | 180 | ||
Max feeding force | kN | 90 | ||
Diesel engine | Power | kW | 154 | Cummins QSB5.9-C210 |
Rotation speed | r/min | 2200 | ||
Mast | Hoisting height | m | 9.8 | |
Adjusting angle | ° | 0~90 | ||
Drilling angle | ° | 45~90 | ||
Feeding Stroke | mm | 3800 | ||
Sliding stroke | mm | 1100 | ||
Main winch | Hoisting force(single wire) | kN | 77 | first floor |
Hoisting speed | m/min | 44 | ||
Steel wire diameter | mm | 18 | ||
Steel wire length | m | 60 | ||
Vice winch | Hoisting force(single wire) | kN | 12 | first floor |
Hoisting speed | m/min | 100 | ||
Steel wire diameter | mm | 6 | ||
Steel wire length | m | 1500 | ||
Mud pump | Max displacement | L/min | 250 | 2.5MPa |
Max pressure | MPa | 6 | 52L/min | |
Foot clamp | Clamping scope | mm | 55.5~117.5 | |
The main weight | t | 13 | ||
dimension | Working dimension | mm | 4715×2240×9800 | (L×W×H) |
Transport dimension | mm | 6400×2240×2500 |